GM Malibu/Cutlass 1997-2000

Parking Brake Lever

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Remove the 3 parking brake pedal lever nuts (5), then remove the parking brake pedal lever assembly (5), and then remove the parking brake cable (3) from the lever attaching point (2)

  1. Remove the left sound insulator.
  2.  
  3. Remove the left carpet retainer.
  4.  
  5. Move the carpet and sound deadener aside.
  6.  
  7. Detach the PCM electrical connections.
  8.  
  9. Remove the PCM retaining bracket door.
  10.  
  11. Remove the PCM.
  12.  
  13. Remove the PCM bracket.
  14.  
  15. Remove the 3 parking brake pedal lever nuts.
  16.  
  17. Remove the parking brake lever.
  18.  
  19. Detach the electrical connection from the lever assembly.
  20.  
  21. Remove the parking brake cable from the lever attaching point.
  22.  

To install:

  1. Connect the parking brake cable to the lever attaching point.
  2.  
  3. Attach the electrical connection to the lever assembly.
  4.  
  5. Install the brake lever assembly. Tighten the nuts to 18 ft. lbs. (25 Nm).
  6.  
  7. Attach the PCM electrical connections.
  8.  
  9. Install the PCM retaining bracket door.
  10.  
  11. Install the PCM.
  12.  
  13. Install the PCM bracket.
  14.  
  15. Carefully place the carpet back into position.
  16.  
  17. Install the left carpet retainer.
  18.  
  19. Install the left sound insulator.
  20.  

 
label.common.footer.alt.autozoneLogo