GM Metro/Sprint 1985-1993 Repair Guide

Condenser Fan or Compressor Clutch Relay

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the relay from the fuse and relay box.
  4.  
  5. Connect a 12 volt source between terminals 1 and 3 while checking for continuity between terminals 2 and 4.
  6.  
  7. If no continuity exists, replace the relay.
  8.  
  9. Install the relay in the fuse and relay box.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo