GM Metro/Sprint 1985-1993 Repair Guide

Brake Pedal

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Brake pedal assembly

  1. Remove cover from steering column, as required.
  2.  
  3. Remove cotter pin and clevis pin from brake booster pushrod.
  4.  
  5. Release brake pedal return spring tension.
  6.  
  7. Remove brake pedal shaft bolt and nut.
  8.  
  9. Remove brake pedal from vehicle.
  10.  

To install:
  1. Inspect brake pedal bushings for wear and replace as necessary.
  2.  
  3. Install brake pedal to vehicle and secure with shaft bolt and nut. Tighten bolt to 17 ft. lbs. (20 Nm).
  4.  
  5. Reposition and tension pedal return spring.
  6.  
  7. Install cotter pin and clevis pin to brake booster pushrod.
  8.  
  9. Install cover on steering column, as required.
  10.  

 
label.common.footer.alt.autozoneLogo