GM Metro/Sprint 1985-1993 Repair Guide

Clutch Cable

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the clutch cable joint nut and disconnect the cable from the release arm.
  4.  
  5. Remove the clutch cable bracket mounting nuts and remove the bracket from the cable.
  6.  
  7. Remove the cable retaining bolts at the clutch pedal.
  8.  
  9. Remove the cable from the vehicle.
  10.  

To install:
  1. Before installation, apply grease to the hook and pin end of the cable.
  2.  
  3. Connect the cable to the clutch pedal and install the retaining bolts.
  4.  
  5. Install the clutch cable bracket on the cable.
  6.  
  7. Position the bracket on the transaxle and install the mounting bolts.
  8.  
  9. Connect the cable to the release lever and install the joint nut on the cable.
  10.  
  11. Adjust the pedal free-play as previously outlined and connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo