GM Metro/Sprint 1985-1993 Repair Guide

Clutch Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the plastic cover from steering column, as required.
  4.  
  5. Disconnect the clutch switch electrical connector.
  6.  
  7. Depress the clutch pedal and remove the locknut from the threaded portion of the brake light switch.
  8.  
  9. Remove the clutch switch.
  10.  

To install:
  1. Install clutch switch.
  2.  
  3. Rotate the clutch switch into place until the plunger bottoms out onto the pedal stopper.
  4.  
  5. Tighten lock nut to secure into place. Tighten locknut to 115 inch lbs. (13 Nm).
  6.  
  7. Connect clutch switch electrical connector.
  8.  
  9. Install the plastic cover on steering column, as required.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo