GM Metro/Sprint 1985-1993 Repair Guide

Servo Unit

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the servo cable from the servo unit.
  4.  
  5. Disconnect the servo unit electrical harness.
  6.  
  7. Remove the servo unit attaching nut, then remove the servo unit.
  8.  

To install:
  1. Install the servo unit and tighten attaching nut securely.
  2.  
  3. Connect servo unit electrical harness.
  4.  
  5. Install servo cable to servo unit.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo