GM Metro/Sprint 1985-1993 Repair Guide

Oil Pressure Switch

Print

REMOVAL and INSTALLATION

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Checking the oil pressure switch

  1. Disconnect the negative battery cable.
  2.  
  3. Drain the engine oil
  4.  
  5. Disconnect the oil pressure switch electrical connector.
  6.  
  7. Remove the switch from the cylinder block.
  8.  

To install:
  1. Coat the sending unit with sealant and install in the cylinder block
  2.  
  3. Connect the oil pressure switch electrical connector.
  4.  
  5. Fill the engine with oil.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo