GM Metro/Sprint 1985-1993 Repair Guide

Instrument Cluster

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Instrument panel cluster - Sprint



Click image to see an enlarged view

Fig. Fig. 2: Instrument panel cluster - Metro

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel trim bezel.
  4.  
  5. Disconnect the retaining clip and the speedometer cable at the transaxle to ease cluster removal.
  6.  
  7. Remove the cluster assembly from the instrument panel.
  8.  
  9. Disconnect the speedometer cable and all electrical connectors from the back of the cluster assembly.
  10.  

To install:
  1. Connect the speedometer cable and all electrical connectors to the back of the cluster assembly.
  2.  
  3. Install the cluster assembly in the instrument panel.
  4.  
  5. Connect the retaining clip and the speedometer cable at the transaxle.
  6.  
  7. Install the instrument panel trim bezel.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo