GM Metro/Sprint 1985-1993 Repair Guide

Instrument Panel Cluster Trim Bezel

Print

REMOVAL & INSTALLATION



  1. Disable the SIR (air bag) system.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the lower steering column trim panel.
  6.  
  7. Loosen the upper steering column and lower steering support to gain clearance for bezel removal.
  8.  
  9. Remove the instrument panel cluster trim bezel.
  10.  
  11. Disconnect the electrical connectors.
  12.  

To install:
  1. Connect the electrical connectors.
  2.  
  3. Install the instrument panel cluster trim bezel.
  4.  
  5. Tighten the upper steering column and lower steering support to 10 ft. lbs. (14 Nm).
  6.  
  7. Install the lower steering column trim panel.
  8.  
  9. Connect the negative battery cable.
  10.  
  11. Enable the SIR (air bag) system.
  12.  

 
label.common.footer.alt.autozoneLogo