REMOVAL & INSTALLATION
See Figure 1
- Remove the inside door handle bezel and gently pull from door trim.
- Remove screws from armrest handle garnish.
- Remove plastic screw covers from door armrest.
- Remove screws and armrest from door.
- Remove regulator handle using a cloth to remove snapring.
- Gently pry door panel away from door, disengaging retaining clips.
- Install door panel to door and press retaining clips into place.
- Install snapring to window regulator handle and install handle.
- Install armrest to door.
- Install screws and plastic screw covers.
- Install screw and armrest handle garnish.
- Install inside door handle bezel.