GM Metro/Sprint 1985-1993 Repair Guide

Parking Lamps

Print

REMOVAL & INSTALLATION



See Figures 1 through 5



Click image to see an enlarged view

Fig. Fig. 1: Front turn signal lamp



Click image to see an enlarged view

Fig. Fig. 2: Removing the rear combination lamp attaching screws



Click image to see an enlarged view

Fig. Fig. 3: Pull the combination lamp assembly away from the vehicle.



Click image to see an enlarged view

Fig. Fig. 4: Remove the bulb socket from the lamp assembly by turning counterclockwise

Front Turn Signal and Parking Lights
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the screws from the parking lamp assembly.
  4.  
  5. Remove the parking lamp assembly.
  6.  
  7. Remove the socket from the lamp assembly.
  8.  
  9. Remove the bulb from the socket.
  10.  
  11. Installation is the reverse of removal.
  12.  

Front Turn Signal Lamps
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the screws from the turn signal lamp assembly.
  4.  
  5. Remove the turn signal lamp assembly.
  6.  
  7. Remove the socket from the lamp assembly.
  8.  
  9. Remove the bulb from the socket.
  10.  
  11. Installation is the reverse of removal.
  12.  

License Plate Lamps
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the screws from the license plate lamp assembly.
  4.  
  5. Remove the license plate lamp assembly.
  6.  
  7. Remove the socket from the lamp assembly.
  8.  
  9. Remove the bulb from the socket.
  10.  
  11. Installation is the reverse of removal.
  12.  

Rear Combination Lamp

The rear combination lamp assembly contains the backup lights, rear parking lights and brake lights.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear garnish from vehicle.
  4.  
  5. Remove the rear combination lamp assembly attaching screws and pull the lamp assembly away from the end panel.
  6.  
  7. Remove the four bulb sockets from the lamp assembly.
  8.  
  9. Remove the lamp assembly, then remove the bulbs from the sockets.
  10.  
  11. Installation is the reverse of removal.
  12.  

Dome Lamp
  1. Disconnect the negative battery cable.
  2.  
  3. Gently pry dome lamp lens from lamp assembly.
  4.  
  5. Remove dome lamp bulb.
  6.  
  7. Installation is the reverse of removal.
  8.  

Instrument Panel Cluster Lamps
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster from the vehicle.
  4.  
  5. Remove the bulb sockets from the back of the cluster assembly.
  6.  
  7. Remove the bulbs from the sockets.
  8.  
  9. Installation is the reverse of removal.
  10.  



Click image to see an enlarged view

Fig. Fig. 5: Bulb Usage Charts: Exterior Lighting

 
label.common.footer.alt.autozoneLogo