GM Metro/Sprint 1985-1993 Repair Guide

Radio Receiver

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Radio receiver removal/installation

  1. Disconnect the negative battery cable.
  2.  
  3. Open the glove box. Remove the glove box open panel.
  4.  
  5. Remove the air conditioning switch connector and heater control unit lever knobs. Pull heater control unit cover plate from instrument panel.
  6.  
  7. Remove the gearshift control lever upper boot and center console.
  8.  
  9. Remove the ashtray.
  10.  
  11. Remove the instrument panel center trim bezel and radio face plate.
  12.  
  13. Remove the screw from the back of the radio receiver and the screws from the front face of the radio.
  14.  
  15. Remove the radio.
  16.  

To install:
  1. Install the radio. Tighten screws securely.
  2.  
  3. Install the instrument panel center trim bezel and radio face plate.
  4.  
  5. Install the ashtray.
  6.  
  7. Install the gearshift control lever upper boot and center console.
  8.  
  9. Pull heater control unit cover plate from instrument panel. Install the air conditioning switch connector and heater control unit lever knobs.
  10.  
  11. Install the glove box open panel.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo