GM Metro/Sprint 1985-1993 Repair Guide

Combination Switch

Print

REMOVAL & INSTALLATION



  1. On vehicles equipped with an air bag, the air bag system must be disarmed before working around the steering wheel or instrument panel.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the lower steering column trim cover.
  6.  
  7. Loosen the steering column mounting nuts and lower column slightly.
  8.  
  9. Remove upper and lower steering column covers.
  10.  
  11. Disconnect combination switch electrical connector.
  12.  
  13. Remove switch from column.
  14.  

To install:
  1. Install switch to column.
  2.  
  3. Connect combination switch electrical connector.
  4.  
  5. Install upper and lower steering column covers.
  6.  
  7. Tighten the steering column mounting nuts to 10 ft. lbs. (14 Nm).
  8.  
  9. Install the lower steering column trim cover.
  10.  
  11. Install the steering wheel.
  12.  

 
label.common.footer.alt.autozoneLogo