GM Metro/Sprint 1985-1993 Repair Guide

Relieving Fuel System Pressure

Print

  1. Remove the gas tank cap.
  2.  
  3. Remove the control relay.
  4.  
  5. Start the engine and run at idle. Allow it to run until the engine stalls due to lack of fuel.
  6.  
  7. Engage the starter for a few seconds to assure relief of remaining fuel pressure.
  8.  
  9. Disconnect negative battery cable.
  10.  
  11. Connect negative battery cable after service has been completed.
  12.  

 
label.common.footer.alt.autozoneLogo