GM Metro/Sprint 1985-1993 Repair Guide

Windshield Washer Pump

Print

Dual washer pumps are located on the washer reservoir. One feeds the front windshield washer system, the other feeds the rear windshield washer. Removal and installation procedures are the same for both pumps.

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the washer pump electrical connectors.
  4.  
  5. Remove the screws and clips attaching the reservoir to the wheel housing.
  6.  
  7. Remove the attaching nuts and the washer fluid reservoir from the vehicle.
  8.  
  9. Remove the washer pumps from the reservoir.
  10.  

To install:
  1. Install the washer pumps on the reservoir.
  2.  
  3. Install the washer fluid reservoir on the vehicle.
  4.  
  5. Install the screws and clips attaching the reservoir to the wheel housing.
  6.  
  7. Connect the washer pump electrical connectors.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo