GM Metro/Sprint 1985-1993 Repair Guide

Windshield Washer Reservoir

Print

A single reservoir feeds both front and rear washer systems. The reservoir is located on the left wheel housing in the engine compartment.

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the washer pump electrical connectors.
  4.  
  5. Remove the screws and clips attaching the reservoir to the wheel housing.
  6.  
  7. Remove the attaching nuts and the washer fluid reservoir from the vehicle.
  8.  

To install:
  1. Install the washer fluid reservoir on the vehicle.
  2.  
  3. Install the screws and clips attaching the reservoir to the wheel housing.
  4.  
  5. Connect the washer pump electrical connectors.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo