GM Prizm/Nova 1985-1993 Repair Guide

ABS Lamp Driver Module

Print

The lamp module driver is located on the instrument panel harness attached to the back of the instrument panel.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel from the vehicle as outlined in Routine Maintenance 0 .
  4.  
  5. Slide the glove box all the way out or remove it completely.
  6.  
  7. Disconnect the lamp driver module electrical connector and disconnect the module from the instrument panel harness.
  8.  

To install:
  1. Connect the lamp driver module electrical connector and connect the module to the instrument panel harness.
  2.  
  3. Install the instrument to the vehicle as outlined in Routine Maintenance 0 .
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo