GM Prizm/Nova 1985-1993 Repair Guide

Enable Relay

Print

REMOVAL & INSTALLATION



The enable relay is located on the right side of the engine compartment, bolted to the fender apron.

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the electrical connection.
  4.  
  5. Remove the 1 bolt and remove the relay from the fender apron.
  6.  

To install:
  1. Reposition the enable relay to the vehicle and connect the electrical connector.
  2.  
  3. Secure the enable relay to the vehicle with the bolt and tighten to 71 inch lbs. (8 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo