GM Prizm/Nova 1985-1993 Repair Guide

Blower Motor Resistor

Print

REMOVAL AND INSTALLATION



1993

See Figure 1

  1. Disconnect the negative cable.
  2.  
  3. Remove the 3 bolts and 3 screws and remove the glove box from the vehicle.
  4.  
  5. Disconnect the electrical connector from the blower resistor assembly.
  6.  
  7. Remove the 2 screws and remove the resistor from the vehicle.
  8.  
  9. Installation is the reverse of the removal procedure. Reconnect the negative battery cable. Check the blower motor for proper operation at all speeds after installation.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Blower motor resistor - 1993

 
label.common.footer.alt.autozoneLogo