REMOVAL & INSTALLATION
See Figures 1 and 2
- Loosen and remove the grille-to-fender, grille-to-radiator support or grille-to-center support retainers.
- Pull the grille forward sufficiently and unplug any necessary wiring (such as side marker wiring and bulb sockets).
- Remove the grille from the vehicle.
- Installation is the reverse of removal. Be careful not to overtighten any of the fasteners as the grille, bezel and fasteners are all easily damaged. Most fasteners should be tightened to no more than 12 inch lbs. (1.4 Nm).