GM S-Series Pick-ups and SUV's 1994-1999 Repair Guide

Rear Windshield Wiper Switch

Print

REMOVAL & INSTALLATION



1994 Models

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the rear wiper/washer switch-1994 models

  1. Disconnect the negative battery cable.
  2.  
  3. Unfasten the switch-to-instrument panel screws.
  4.  
  5. Remove the switch trim plate from the instrument panel, then unplug the switch electrical harness.
  6.  
  7. Separate the switch from the trim plate.
  8.  

To install:
  1. Attach the switch to the trim plate.
  2.  
  3. Attach the switch electrical harness, then position the switch trim plate on the instrument panel.
  4.  
  5. Install and tighten the switch-to-instrument panel retaining screws.
  6.  
  7. Connect the negative battery cable and check the switch for proper operation.
  8.  

1995-99 Models

See Figure 2



Click image to see an enlarged view

Fig. Fig. 2: Remove the trim plate to access the rear wiper/washer switch electrical connection-1995-99 models

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the switch from the trim plate, then unplug the switch electrical harness.
  4.  

To install:
  1. Attach the switch electrical harness, then position the press the switch into the trim plate.
  2.  
  3. Connect the negative battery cable and check the switch for proper operation.
  4.  

 
label.common.footer.alt.autozoneLogo