GM S10/S15/Sonoma Pick-Ups 1982-1993 Repair Manual

Seats

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

Most vehicles covered by this manual are equipped with bench seats. Removal of the bench seat assembly is a relatively simple process. Locate and remove the retainers (usually nuts), then carefully lift the seat from the brackets.

Some vehicles (such as the MFI-Turbo and some other later model trucks) may be equipped with manual or power bucket seats. Removal of a bucket seat is also a relatively simple process, once you find the retainers. On some vehicles you will have to remove the lower trim panels which are used to hide the brackets. Also, power seats will have one or more electrical wiring connectors which must be disengaged before attempting to remove the seat. Once the fasteners are removed and any wiring has been disconnected, lift the bucket seat from the brackets.



Click image to see an enlarged view

Fig. Fig. 1: Front bench seat and adjuster mounting



Click image to see an enlarged view

Fig. Fig. 2: Bucket seat trim covers



Click image to see an enlarged view

Fig. Fig. 3: Folding jumpseats (extended cab)



Click image to see an enlarged view

Fig. Fig. 4: Manual front bucket seat components

 
label.common.footer.alt.autozoneLogo