GM S10/S15/Sonoma Pick-Ups 1982-1993 Repair Manual

Transmission

Print

MANUAL



See Figure 1

A transmission serial number is stamped on each transmission case or to a plate which is welded to the case. Location of the ID number will vary with the transmission manufacturer. On many of the transmissions covered by this manual the ID number is located on a metal plate which is attached to the extension housing case bolt, on the left-side. Some later model vehicles, such as those equipped with the Borg Warner T-5 transmission locate the transmission ID number on the front right of the housing.



Click image to see an enlarged view

Fig. Fig. 1: Manual transmission identification number location-Borg Warner T-5

AUTOMATIC



See Figures 2, 3 and 4



The identification number for the 180C is located on a metal tag attached to the left-front of the transmission case.
 
The identification numbers for the 200C (3-spd) are stamped on the right rear-side of the transmission case, behind the modulator on the left rear of the case and on the right front of the case, on or near the bellhousing.
 
The identification number for the 700-R4 is stamped on the right or left rear-side of the transmission pan rail.
 
The identification number for the 4L60 and 4L60-E is stamped on the right rear of the housing just above the pan rail.
 



Click image to see an enlarged view

Fig. Fig. 2: Examples of common automatic transmission ID location-180C, 700-R4 and 4L60 shown



Click image to see an enlarged view

Fig. Fig. 3: Location of the 220C automatic transmission identification numbers



Click image to see an enlarged view

Fig. Fig. 4: 4L60-E automatic transmission identification

 
label.common.footer.alt.autozoneLogo