GM Storm/Spectrum 1985-1993 Repair Guide

Cycling Clutch Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable and properly discharge the refrigerant system.
  2.  
  3. Disconnect the electrical connector on the switch.
  4.  
  5. Remove the switch.
  6.  

To install:
  1. Connect the switch and the electrical connector.
  2.  
  3. Connect the negative battery cable.
  4.  
  5. Evacuate, charge and check the operation of the system.
  6.  

 
label.common.footer.alt.autozoneLogo