GM Storm/Spectrum 1985-1993 Repair Guide

Clutch Linkage

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery terminal from the battery.
  2.  
  3. Loosen the clutch cable adjusting nuts. Disconnect the cable from the release arm and cable bracket.
  4.  
  5. At the clutch pedal, remove the cable retaining bolt.
  6.  
  7. Disconnect the cable from the front of the dash.
  8.  
  9. Remove the clutch cable from the vehicle.
  10.  
  11. To install, grease the clutch cable pin and reverse the removal procedures.
  12.  
  13. Adjust the pedal free-play.
  14.  

 
label.common.footer.alt.autozoneLogo