GM Storm/Spectrum 1985-1993 Repair Guide

Servo

Print

LINKAGE ADJUSTMENT



Spectrum
  1. Position the accelerator pedal so that the engine runs at a normal idling speed. Hold the accelerator pedal in this position.
  2.  
  3. Lightly secure the cable casing to the bracket using the cable clamp and self locking hex nut.
  4.  
  5. Adjust the cable casing so that there is a light tension on the servo cable. Make sure not to pull the throttle off the idle setting.
  6.  
  7. Tighten the clamp securely.
  8.  

 
label.common.footer.alt.autozoneLogo