GM Storm/Spectrum 1985-1993 Repair Guide

Intake Air Temperature Sensor

Print

The fuel injected vehicles covered in this guide utilize an Intake Air Temperature (IAT) sensor mounted in the air intake manifold.

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Unplug the sensor electrical connector.
  4.  
  5. Carefully back out the sensor from the manifold.
  6.  
  7. Reverse the removal procedure to install. Coat the sensor threads using sealant, then install and tighten the IAT sensor to 22 ft. lbs. (30 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo