GM Storm/Spectrum 1985-1993 Repair Guide

Manifold Absolute Pressure Sensor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the vacuum hose from the sensor.
  4.  
  5. Unplug the sensor electrical connector.
  6.  
  7. Remove the attaching screws, then remove the sensor from the engine.
  8.  
  9. Reverse the removal procedure to install. Be sure to fully seat, but not overtigten the retaining screws.
  10.  

 
label.common.footer.alt.autozoneLogo