GM Storm/Spectrum 1985-1993 Repair Guide

Radio Receiver/Amplifier/Tape Player

Print

REMOVAL & INSTALLATION



Spectrum
  1. Disconnect battery negative cable.
  2.  
  3. Remove the radio cover attaching screws and the radio cover.
  4.  
  5. Remove the radio and bracket.
  6.  
  7. Disconnect electrical connectors and antenna from the radio.
  8.  
  9. Reverse procedure to install. Connect battery negative cable.
  10.  

Storm

See Figures 1 and 2

  1. Disconnect battery negative cable.
  2.  
  3. Remove 4 heater control knobs.
  4.  
  5. Remove 4 radio bezel attaching screws and the bezel.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Radio bezel removal screws - Storm

  1. Disconnect the illumination light and harness from the radio bezel.
  2.  
  3. Remove the 3 left hand console side panel attaching screws, then the left hand console side panel.
  4.  



Click image to see an enlarged view

Fig. Fig. 2: Console side panel removal - Storm

  1. Remove the 3 right hand console side panel attaching screws, then the right hand console side panel.
  2.  
  3. Remove the radio attaching screws and the radio from the instrument panel.
  4.  
  5. Disconnect electrical connectors and antenna. Reverse procedure to install and connect the battery negative cable.
  6.  

 
label.common.footer.alt.autozoneLogo