GM Storm/Spectrum 1985-1993 Repair Guide

Muffler/Tail Pipe Assembly

Print

REMOVAL & INSTALLATION



  1. Raise and support the vehicle safely.
  2.  
  3. Remove the bolts or nuts and disconnect the pipe from the front of the muffler.
  4.  
  5. If applicable, release rubber hangers and/or disconnect the muffler bracket.
  6.  
  7. Remove the muffler from the vehicle.
  8.  

To install:
  1. Position the muffler to the vehicle.
  2.  
  3. If applicable install any converter bracket fasteners or rubber hangers.
  4.  
  5. Loosely install the pipe-to-muffler fasteners.
  6.  
  7. Make sure the exhaust system is properly routed and tighten the muffler fasteners to 20 ft. lbs. (28 Nm) for the Spectrum or to 32 ft. lbs. (43 Nm) for the Storm.
  8.  
  9. Remove the supports and lower the vehicle.
  10.  
  11. Start the engine and check for leaks.
  12.  

 
label.common.footer.alt.autozoneLogo