GM Storm/Spectrum 1985-1993 Repair Guide

Front Fender Assembly

Print

REMOVAL & INSTALLATION



Storm
  1. Open the hood.
  2.  
  3. Remove the nut cover and nut from the wiper arms. Remove the wiper arms.
  4.  
  5. Remove the plastic clips and remove the cowl vent grille assembly.
  6.  
  7. Remove the 4 bolts from along the top of the fender.
  8.  
  9. Remove the 1 screw and 12 plastic retaining clips from the wheelhousing inner fender and remove the inner fender.
  10.  
  11. By way of the wheelwell, remove the one bolt from the rear of the fender.
  12.  
  13. On the GSi model, remove the 7 screws and remove the front rocker panel molding from below the door.
  14.  
  15. Remove the 1 bolt from the bottom of the fender.
  16.  
  17. Remove the 2 nuts that secure the front fender to the front bumper fascia.
  18.  
  19. Remove the 2 nuts that secure the front fender to the side support retainer.
  20.  
  21. Loosen the front bumper fascia bolts and remove the fender from the vehicle.
  22.  

To install:
  1. Install the front fender and tighten the front bumper fascia bolts.
  2.  
  3. Install the 2 nuts that secure the front fender to the side support retainer.
  4.  
  5. Install the 2 nuts that secure the front fender to the front bumper fascia.
  6.  
  7. Install the 1 bolt to the bottom of the fender.
  8.  
  9. On the GSi model, install the front rocker panel molding to below the door.
  10.  
  11. By way of the wheel well, install the one bolt to the rear of the fender.
  12.  
  13. Install the 1 screw and 12 plastic retaining clips to the wheelhousing inner fender to secure the inner fender.
  14.  
  15. Install the 4 bolts to along the top of the fender.
  16.  
  17. Install the plastic clips and install the cowl vent grille assembly.
  18.  
  19. Install the nut and the nut cover to the wiper arms.
  20.  

 
label.common.footer.alt.autozoneLogo