GM Storm/Spectrum 1985-1993 Repair Guide

Grille

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the front grille emblem.
  2.  
  3. Raise the setting tip of all clips holding the grille.
  4.  
  5. Remove all screws holding the grille.
  6.  
  7. Disconnect front wiring harness if parking or turn signal lights are located in grille.
  8.  
  9. Remove grille assembly.
  10.  
  11. Attaching clips must be installed into the grille prior to installation.
  12.  
  13. Installation is the reverse of removal.
  14.  



Click image to see an enlarged view

Fig. Fig. 1: Spectrum grille assembly

 
label.common.footer.alt.autozoneLogo