GM Storm/Spectrum 1985-1993 Repair Guide

Control Cables

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the control lever assembly.
  2.  
  3. Remove the control cable clip.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Control cable clip locations - Storm

  1. Disconnect the control cable and remove from the vehicle.
  2.  
  3. Installation is the reverse of the removal procedure.
  4.  

ADJUSTMENT



See Figure 2

Air Source Control Cable

Slide the select lever to the left, then connect the control cable at the CIRC position. Secure the cable with the clip.



Click image to see an enlarged view

Fig. Fig. 2: Control lever adjustments - Storm

Temperature Control Cable

Slide the select lever to the left, connect the control cable at the COLD position. Secure the cable with the clip.

Air Select Control Cable

Slide the select lever to the right, connect the control cable at the DEFROST position. Secure the cable with the clip.

 
label.common.footer.alt.autozoneLogo