GM Storm/Spectrum 1985-1993 Repair Guide

Engine Coolant Temperature Gauge

Print

REMOVAL & INSTALLATION



Spectrum
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster from the instrument panel.
  4.  
  5. Remove the cluster lens and retainer from the cluster.
  6.  
  7. Remove the engine coolant temperature gauge retaining screws from the rear of the cluster.
  8.  
  9. Remove the engine coolant temperature gauge from the cluster.
  10.  
  11. Installation is the reverse order of the removal procedure. Connect battery negative cable.
  12.  

Storm

For removal and installation of the engine coolant temperature gauge, refer to the procedures under FUEL GAUGE, in this section.

 
label.common.footer.alt.autozoneLogo