GM Storm/Spectrum 1985-1993 Repair Guide

Printed Circuit Board

Print

REMOVAL & INSTALLATION



Spectrum
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster from the instrument panel.
  4.  
  5. Remove the cluster lens and retainer from the cluster.
  6.  
  7. Remove the circuit board retaining screws from the rear of the cluster.
  8.  
  9. Remove the circuit board from the cluster.
  10.  
  11. Installation is the reverse order of the removal procedure. Connect battery negative cable.
  12.  

Storm
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster from the instrument panel.
  4.  
  5. Remove the cluster lens and retainer from the cluster.
  6.  
  7. Remove the gauges.
  8.  
  9. Remove the circuit board from the cluster.
  10.  
  11. Installation is the reverse order of the removal procedure. Connect battery negative cable.
  12.  

 
label.common.footer.alt.autozoneLogo