GM Storm/Spectrum 1985-1993 Repair Guide

Windshield Wiper Switch

Print

REMOVAL & INSTALLATION



Spectrum
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster hood attaching screws and remove the cluster hood.
  4.  
  5. Disconnect the windshield wiper switch connector and the lighting switch connector.
  6.  
  7. Remove the instrument cluster hood inside attaching nuts and bracket and then push the switches out of the cluster hood from the inside.
  8.  
  9. To install, reverse the removal procedures.
  10.  

Storm

See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the cluster switch panel.
  4.  
  5. Remove the 2 screws securing the wiper/washer switch assembly to the cluster switch panel.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Windshield wiper-washer switch - Storm

  1. Remove the wiper/washer switch assembly from the cluster switch panel.
  2.  
  3. Installation is the reverse order of the removal procedure.
  4.  

 
label.common.footer.alt.autozoneLogo