GM Storm/Spectrum 1985-1993 Repair Guide

Door Panels

Print

REMOVAL & INSTALLATION



  1. Remove window crank handle with appropriate clip removal tool.
  2.  
  3. Remove arm rest attaching screws.
  4.  
  5. Remove the screw from the inside door handle. Slide the handle forward and disconnect the handle from the control rods and remove the handle.
  6.  
  7. Remove the mirror panel cover from inside the door.
  8.  
  9. Gently pry the speaker cover from the door and remove the speaker.
  10.  
  11. Remove the 1 screw from the door panel and gently pry the door panel away from the door to release the clips. Lift the door panel up and away from the door.
  12.  

To install:
  1. Install the door panel to the door. Push in on the clips to seat.
  2.  
  3. Connect the speaker wires to the speaker and install the speaker and speaker cover.
  4.  
  5. Install the interior door handle.
  6.  
  7. Install the arm rest screws.
  8.  
  9. Install the window crank handle.
  10.  

 
label.common.footer.alt.autozoneLogo