GM Storm/Spectrum 1985-1993 Repair Guide

Front Seats

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove door sill plate if necessary.
  2.  
  3. Remove the seat adjuster bracket cover. Loosen and remove the seat adjuster attaching bolts.
  4.  
  5. Remove the seat from the vehicle.
  6.  

Some rear seats may be attached by spring clips. To remove, push seat bench toward the rear of the car and lift up.

  1. Installation is the reverse of removal. Torque seat attaching bolts to 29 ft. lbs.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Front seat removal and installation - Storm shown

 
label.common.footer.alt.autozoneLogo