REMOVAL & INSTALLATION
- Raise the headlamp cover.
- Disconnect the negative battery cable.
- Remove the headlamp lower garnish retaining screws and remove the garnish.
- Remove the nut securing the link joint, on the inside of the cover, and remove the link joint.
- Remove the four bolts securing the headlamp cover and remove the cover.
- Install the headlamp cover and tighten the four bolts to 89 in. lbs. (10 Nm).
- Install the link joint and tighten the nut.
- Install the headlamp lower garnish and tighten the retaining screws.