GM Storm/Spectrum 1985-1993 Repair Guide

Brake Lever Assembly

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable. Remove the center console from the vehicle.
  2.  
  3. Disconnect the electrical connector from the parking brake switch.
  4.  
  5. Loosen the parking brake cable adjuster nut or turnbuckle, if necessary.
  6.  
  7. Disconnect the parking brake cable from the lever assembly.
  8.  
  9. Remove the 2 bolts from the lever. Remove the lever assembly.
  10.  

To install:
  1. Connect the parking brake cable to the lever.
  2.  
  3. Install the lever assembly to the body with the 2 retaining bolts. Torque the retaining bolts to 10 ft. lbs.
  4.  
  5. Connect the electrical connector to the parking brake switch.
  6.  
  7. Install the center console assembly to the vehicle.
  8.  
  9. Adjust the parking brake. Check parking brake for proper operation.
  10.  

 
label.common.footer.alt.autozoneLogo