GM Storm/Spectrum 1985-1993 Repair Guide

Wiper Linkage

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery terminal from the battery.
  2.  
  3. Remove the locknuts retaining the wiper arms and the wiper arms.
  4.  
  5. Remove the cowl cover, wiper motor cover and the electrical connector.
  6.  
  7. Disconnect the drive arm from the wiper link.
  8.  
  9. Remove the mounting bolts and the wiper motor.
  10.  
  11. Remove the wiper linkage.
  12.  

To install:
  1. Install the wiper linkage.
  2.  
  3. Install the wiper motor and the mounting bolts.
  4.  
  5. Connect the drive arm to the wiper link.
  6.  
  7. Connect the electrical connector.
  8.  
  9. Install the wiper motor cover and the cowl cover.
  10.  
  11. Install the wiper arms and tighten the lock nuts.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo