Grand Cherokee 2006-2007

Removal & Installation

Print

  1. Disconnect and isolate the negative battery cable.
  2.  
  3. Remove the instrument panel silencer from the passenger side of the instrument panel.
  4.  
  5. Remove the glove box from the instrument panel.
  6.  
  7. Disconnect the blower motor wire harness connector from the blower motor power module or resistor , depending on how equipped.
  8.  
  9. Remove the three screws that secure the blower motor to the HVAC housing.
  10.  
  11. Remove the blower motor from the HVAC housing.

    Click image to see an enlarged view

    Fig. View of the blower motor (housing removed) on the Grand Cherokee

  12.  

To install:

  1. Position the blower motor into the HVAC housing.
  2.  
  3. Install the three screws that secure the blower motor to the HVAC housing. Tighten the screws to 20 inch lbs. (2.2 Nm).
  4.  
  5. Connect the wire harness connector to the blower motor power module or resistor, depending on how equipped.
  6.  
  7. Install the glove box into the instrument panel.
  8.  
  9. Install the instrument panel silencer onto the passenger side of the instrument panel.
  10.  
  11. Reconnect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo