Grand Cherokee 2006-2007

Removal & Installation

Print

  1. Disconnect and isolate the negative battery cable.
  2.  
  3. Remove the center bezel from the instrument panel and place it on a workbench.
  4.  
  5. Remove the screws that secure the Electronic Vehicle Information Center (EVIC) control and the A/C-heater control to the center bezel and remove the controls.
  6.  

To install:

  1. Position the A/C-heater control and the EVIC control into the instrument panel center bezel .
  2.  
  3. Install the screws that secure the A/C-heater control and the EVIC control to the center bezel. Tighten the screws to 17 inch lbs. (2 Nm).
  4.  
  5. Install the center bezel onto the instrument panel.
  6.  
  7. Reconnect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo