Grand Cherokee 2006-2007

Lower Control Arms

Print

Removal & Installation



Left Side
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Raise the vehicle and support the rear axle.
  4.  
  5. Remove the fuel tank.
  6.  
  7. Remove the lower suspension arm nut and bolt from the axle bracket.
  8.  
  9. Remove the nut and bolt from the frame rail and remove the lower suspension arm.
    NOTE
    All torques should be done with vehicle on the ground with full vehicle weight.

  10.  

To install:

  1. Position the lower suspension arm in the frame rail.
  2.  
  3. Install the frame rail bracket bolt and nut. Tighten to130 ft. lbs.(176 Nm).
  4.  
  5. Position the lower suspension arm in the axle bracket.
  6.  
  7. Install the axle bracket bolt and nut. Tighten to 155 ft. lbs. (210 Nm).
  8.  
  9. Install the fuel tank.
  10.  
  11. Remove the supports and lower the vehicle.
  12.  

Right Side
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Raise the vehicle and support the rear axle.
  4.  
  5. Remove the lower suspension arm nut and bolt from the axle bracket.
  6.  
  7. Remove the nut and bolt from the frame rail and remove the lower suspension arm.
  8.  

To install:


NOTE
All torques should be done with vehicle on the ground with full vehicle weight.

  1. Position the lower suspension arm in the frame rail.
  2.  
  3. Install the frame rail bracket bolt and nut tighten to to130 ft. lbs.(176 Nm).
  4.  
  5. Position the lower suspension arm in the axle bracket.
  6.  
  7. Install the axle bracket bolt and nut. Tighten to 155 ft. lbs. (210 Nm).
  8.  
  9. Remove the supports and lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo