GrandCaravan 2008

Blower Motor

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect and isolate the negative battery cable.
  4.  
  5. Remove the rear heater-A/C (HVAC) housing and place it on a workbench. Refer to Auxiliary Heating & Air Conditioning, HVAC Housing, removal & installation.
  6.  
  7. Disconnect the rear HVAC wire harness connector (4) from the rear blower motor (2).
  8.  
  9. Remove the 3 screws (3) that secure the rear blower motor to the rear HVAC housing and remove the blower motor.

    Click image to see an enlarged view

    Fig. Remove the rear blower motor from the vehicle

  10.  

To install:

  1. Position the rear blower motor (2) into the HVAC housing (1).
  2.  
  3. Install the 3 screws (3) that secure the rear blower motor to the HVAC housing. Tighten the screws to 17 inch lbs. (2 Nm).
  4.  
  5. Connect the rear HVAC wire harness connector (4) to the rear blower motor.
  6.  
  7. Install the HVAC housing. Refer to Auxiliary Heating & Air Conditioning, HVAC Housing, removal & installation.
  8.  
  9. Reconnect the negative battery cable and tighten the nut to 45 inch lbs. (5 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo