H3 2006

Oil Pressure Switch

Print

Location



3.5L & 3.7L Engines

The oil pressure switch is located on the engine block above the oil filter.

Removal & Installation



3.5L & 3.7L Engines
  1. Remove the engine shield.
  2.  
  3. Disconnect the oil pressure switch electrical connector.

    Click image to see an enlarged view

    Fig. Disconnect the oil pressure switch (2) electrical connector (1)

  4.  
  5. Remove the engine oil pressure switch.

    Click image to see an enlarged view

    Fig. Remove the engine oil pressure switch

  6.  

To install:

  1. Install the engine oil pressure switch. Tighten the switch to 15 ft. lbs. (20 Nm).
  2.  
  3. Connect the oil pressure switch electrical connector.
  4.  
  5. Install the engine shield.
  6.  

 
label.common.footer.alt.autozoneLogo