H3 2006

Brake Calipers

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the tire and wheel.
  4.  
  5. Remove the brake hose banjo bolt.

    Click image to see an enlarged view

    Fig. Exploded view of the front brake caliper assembly

  6.  
  7. Remove the 2 brake hose banjo washers.
  8.  
  9. Disconnect the front brake hose.
    NOTE
    Cap or plug the brake hose to prevent fluid loss and/or contamination.

  10.  
  11. Remove the 2 brake caliper bolts
  12.  
  13. Remove the front brake caliper.
  14.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Tighten the brake caliper bolts to 144 ft. lbs. (195 Nm).
    NOTE
    Use new brake hose banjo washers. Do not reuse the old washers.

  4.  
  5. Tighten the brake hose banjo bolt to 30 ft. lbs. (10 Nm).
  6.  
  7. Bleed the brake system.
  8.  

 
label.common.footer.alt.autozoneLogo