Removal & Installation
Special tools required:
J 2619-01: Slide hammerJ 8092: Universal drive handle 3 / 4 inchJ 21426: Extension housing seal installerJ 29369-2: Bushing and bearing remover 2-3 inchJ 45232: Differential bearing adjuster needle bearing installer-Left
Remove the wheel drive shaft.
Remove the swaybar link from the lower control arm.
Using the J 29369-2 and the J 2619-01, remove the axle seal.
Using the J 29369-2 and the J 2619-01, remove the axle bearing.
- Position the axle bearing in the intermediate housing.
Using the J 45232 and the J 8092, install the axle bearing.
Using the J 21426, install the axle seal.
- Install the wheel drive shaft.
- Install the swaybar link to the lower control arm.
- Check in fluid level.
- Lower the vehicle.