H3 2006

Control Links

Print

Removal & Installation



Stabilizer Shaft Link
  1. Raise and support the vehicle.
  2.  
  3. Remove the nuts from the link assemblies.

    Click image to see an enlarged view

    Fig. Remove the nuts from the link assemblies

  4.  
  5. Remove the link assemblies.
  6.  
  7. Inspect all of the parts for wear and damage.
  8.  

To install:

  1. Support the lower control arms at curb height.
  2.  
  3. Install the link assemblies.
  4.  
  5. Install the nuts to the link assemblies. Tighten the nut to 59 ft. lbs. (80 Nm).
  6.  
  7. Lower the vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo