H3 2006

Removal & Installation

Print

Specific to:

Hummer H3 2006-2010

  1. Remove the fuel tank module.
  2.  
  3. Disconnect the fuel level sensor electrical connector from the module cover.

    Click image to see an enlarged view

    Fig. Disconnect the fuel level sensor electrical connector (1) from the module cover

  4.  
  5. Complete the following in order to remove the fuel level sensor from the module bucket:

    Click image to see an enlarged view

    Fig. Remove the fuel level sensor (1) from the module bucket

    1. Disengage the locking tabs on the sensor.
    2.  
    3. Slide the sensor upward from the bucket.
    4.  

  6.  

To install:

  1. Complete the following in order to install the fuel level sensor to the module bucket.
    1. Align the edges of the sensor with the slots in the module bucket.
    2.  
    3. Slide the sensor down into position, ensure the locking tabs are fully engaged.
    4.  

  2.  
  3. Connect the fuel level sensor electrical connector to the module cover.
  4.  
  5. Install the fuel tank module.
  6.  

 
label.common.footer.alt.autozoneLogo